ZX-1 micro Array+ HD |
||||||||||||||||||||||||||||||||||||||||||||||||||
Fiberoptic Connector Measuring Interferometers |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Repeatability based on 100 measurements without disturbing the connector between measurements MT/MPO® connector reproducability and repeatability is somewhat determined by the polish quality and surface geometry
|
Measured Parameter | Reproducibility - One Sigma | Repeatability - One Sigma |
Radius of Curvature | 0.5% | 0.25% |
Apex Offset | 3.0µm | 1.0µm |
Fiber Height | 2.5nm | 1.5nm |
Radius of Curvature | 3mm - Flat |
Apex Offset | 0-500µm (value calculated if outside of captured frame) |
Fiber Height | ± 6µm |
Principle of Operation | Michelson Interferometer (non-contact system) |
Measurement Speed | <30 seconds for MT/MPO® connectors. <1 second for single fiber (ex. auto-focus) |
Field of View | 3.0mm nominal - in the horizontal axis. Entire MT connector in the vertical axis |
Operating Wavelengths | 470nm to 645nm depending on mode (solid state sources) |
Power requirements | 100-120V and 210-250V AC 50/60Hz auto sensing |
Due to continued product improvement, specifications are subject to change without notice.
ZX-1 micro Array+ HD Home Page
ZX-1 micro Array+ HD Configurations and Options
ZX-1 micro Array+ HD Specifications
ZX-1 micro Array+ HD Sample Images and QC Reports
Copyright© 1992-2025, Direct Optical Research Company
DORC® is a Registered Trademark of Direct Optical Research Company
Last modified: January 1st, 2025
Tel: (727) 319-9000 sales@dorc.com
DORC®, 8725 115th Avenue North, Largo, FL 33773 USA
We respond to ALL e-mails within 24 hours - if you don't get our response, bypass our SPAM PREVENTION by clicking here!!